Column speaker Metal-case TZ-205

TZ-205

The TZ-205 Column Speaker employs multiple cone speakers arranged vertically on a single baffle board to provide wider horizontal directivity.

Specification

Rated Input	20 W (Max. 30 W)
Rated Impedance	100 V line: 500 Ω (20 W), 1 kΩ (10 W)
Sound Pressure Level	93 dB (1 W, 1 m)
Frequency Response	150 Hz – 10 kHz
Speaker Component	12 cm cone-type × 4
Water Protection	IPX3 equivalent
Finish	Enclosure: Extruded aluminum, silver gray, fully-glazed, baked paint Grille: Punched aluminum net, black, matte, baked paint Mounting bracket: Steel plate, silver gray, fully-glazed, baked paint
Dimensions	167 (W) × 580 (H) × 141 (D) mm
Weight	5.1 kg (unit only), 5.7 kg (including mounting bracket)
Accessory	Mounting bracket …2, Mounting bolt, washer, packing …1 set
Note: A drainage hole is provided on the speaker cable side of the cabinet. When installing the speaker outdoors	make sure that its speaker cable side faces the ground. The speaker must be installed upright or facing down. Installing the speaker in any other position may render the drainage hole